Scaffold tubes and fittings
Commonly called tube and coupler scaffold is a versatile type of scaffold consisting of steel tubes and clamps. Vertical tubes are connected to horizontal tubes via right angle clamps. Diagonal tubes are periodically connected to the scaffold via swivel clamps in order to stabilize the scaffold.
BASIC COMPONENTS:
used for spreading the load in a vertical tube over a greater area.
is used for spreading the load in a vertical tube over a greater area but this has a vertical adjustment.
is used as scaffolding Vertical, Horizontal and Bracing tubes for tubes and Fittings with three types, block, painted and galvanize scaffolding tubes.
is used to connect two scaffolding tubes at a right angle.
is used to connect two scaffolding tubes with different diameters at a right angle.
is used to connect two scaffolding tubes at any angle.
is used to connect two scaffolding tubes with different diameters at any angle.
is used to connect two scaffolding tube end to end.
is not a load bearing coupler but is used to connect putlog and transom tubes to horizontal tubes/ledger tubes.
is used to connect scaffolding tube to a beam or girder flange.
is used to form a temporary access or working platform in a scaffolding which is fully comply with the British Standard marked with the information embossed on the end band.
made from Laminated Veneer Lumber and is use to form a temporary access or working platform in a scaffolding for safe, light weight and higher strength for scaffolding board.
is use to form a temporary access or working platformwith much large capacity, easy disassembly and erection, flexible and economical if scaffolding is well designed.
is use to firmly fastened scaffolding board in to the scaffolding horizontal or ledger tube to make sure the temporary access or working platform is tightly secured.
is use to firmly fastened scaffolding toe board in to the scaffolding vertical or standard tube for safety.
is used for climbing up or down from the temporary access or working platform in different level of the scaffolding with the benefits of lightness, easy to handle and strength.
Is used to firmly fasten scaffolding access ladder to the horizontal scaffolding tube.
is used to provide open access through the scaffolding to minimize the obstruction.
is used when long span is required to provide open access through the scaffolding or temporary roofing and still carry a high loading capacity to minimized the obstruction.
